How to Update Your MAG Box

Keeping your MAG Box updated is essential for smooth IPTV streaming and the best performance. Updating the firmware ensures that your device runs on the latest version, with improved features, security patches, and bug fixes. This guide will walk you through how to update the MAG box, both automatically and manually via USB.

How to Update the MAG Box Firmware

Updating your MAG Box firmware can resolve many issues and enhance performance. Follow these steps for a seamless update:

Step 1: Disconnect the MAG Box from the Internet

Start by disconnecting your MAG Box from the internet. This is important to ensure a clean update process.

Step 2: Reset the MAG Box

Reset the device by turning it off and then on again. This prepares it for the firmware update process.

Step 3: Wait for the “Page Loading Error” to Appear

Once the MAG Box restarts, wait until the “Page Loading Error” message shows on the screen. This indicates that the device is ready for the update.

Step 4: Plug in the Internet Cable

Now, plug the internet cable back into your MAG Box. This is necessary to proceed with the update.

Step 5: Select the Embedded Portal

Next, select the Embedded Portal option on your MAG Box. The system should automatically start updating with the latest firmware version.

Step 6: Manually Trigger the Update (if needed)

If the automatic update does not begin, you can manually trigger the process:

• Press the SET button on your remote.
• Choose the Software Update option and press OK.
• Finally, press the F1 button to start the update process.
  

Step 7: Wait for the Update to Complete

Once the update begins, the MAG Box will download and install the latest firmware. Do not turn off the device or unplug it during this process to prevent issues.

How to Update the MAG Box via USB

In some cases, the MAG Box may lose portal settings after a firmware update, preventing you from adding new portal addresses. To resolve this, you can downgrade or manually update the software using a USB drive.

Step 1: Prepare Your USB Drive

Ensure your USB drive meets the required specifications for updating. You will need to download the latest firmware image file.

Step 2: Download the Firmware Image

Visit the manufacturer’s server to download the required firmware.

Step 3: Create a Directory on the USB Drive

Create a directory named mag<model> on the root of your USB drive (e.g., mag322 for MAG322). Place the imageupdate firmware file in this directory.

Step 4: Insert the USB Drive into the MAG Box

Connect the prepared USB drive to one of the USB ports on your MAG Box. You can use either the rear or front USB port.

Step 5: Access the Software Update Settings

On the MAG Box, navigate to Settings > System Settings > Software Update.

Step 6: Select the USB Update Method

In the Software Update window, set the Update Method to USB. You will see two new fields:

• Disk: The name of your USB drive.
• Path: The path to the update file on your USB drive.
  

Step 7: Verify the Firmware File

Click Verify (OK) to confirm that the MAG Box can detect the imageupdate file on the USB drive.

Step 8: Software Update Window

If the file is detected and readable, the Software Update window will appear. You will see two firmware versions:

• Current Version: The firmware currently running on your MAG device.
• New Version: The firmware available on the USB drive.

Step 9: Choose the Update Option

After comparing the current and new versions:

• Press Exit to cancel the update.
• Press Update (F1) to proceed with the update.

Step 10: Wait for the Update to Finish

A progress bar will display the status of the update. You can also view the log by pressing Show Log on your remote control.

Step 11: Complete the Update Process

Wait for the update to complete. Once finished, the MAG Box will automatically reboot. Do not turn off the device or remove the USB drive until the update is complete.

Conclusion